Play any internet radio station, or any other source from our Audio Pro Control app. If you are using Spotify, then play any playlist from the Spotify app.

Push a preset button and hold it for about 3 seconds. The content is now stored to the selected button.

You can access your stored presets in the Audio Pro Control app:

1. Press the settings icon on the speaker in My Speakers list view.
2. Press Speaker Preset in the menu.

1. Press and hold reset/wifi/connect button on the back of your speaker for 10 sec.
2. Then wait until your speaker has booted up 60-90 seconds and then try and install it back to your wifi.

To group:
1. In the Device view, press the chain link symbol to the right of the speaker’s name.
2. Select the speaker(s) you want to add to the group.
3. Press Done.

To ungroup:
1. Press the chain link symbol to the right of the speaker’s name.
2. Unselect the speaker(s) you want to ungroup.
3. Press Done.

1. Group two or more speakers.
2. When grouped you can change the speaker’s behavior by pressing the L, R or LR circles.
3. Change the symbols so the speaker to the left of you is indicated by L. The right speaker should also be changed so it shows the R symbol.

If you want to play a speaker separately un-group the speaker then change the symbol to LR.

1. Make sure your smartphone or tablet has a Bluetooth function.
2. Turn on your speaker.
3. Change source to Bluetooth.
4. Press Bluetooth button on speaker (or remote), LED will start flashing.
5. Open your Bluetooth settings on your device.
6. After approx. 20sec, your speaker’s name will appear in Bluetooth list.
7. Press the speaker’s name.

Done! Start playing your music.

Example, connecting a turntable:
1. Connect the turntable with a cable to Line in or AUX input on the speaker.
2. (Check the turntables manual, it will need to have a RIAA amplifier integrated otherwise you will need to buy an external RIAA amplifier).
3. Change the source on the speaker to either Line in or AUX depending on where you plugged in the device.

You can now start playing your music on your turntable.

To play to more speakers wirelessly:
1. The speaker to which you have connected the turntable must be the master speaker in the group.
2. In the Device view, press the box with a plus sign to the right of the speaker’s name. Select the speaker(s) you want to add to the group.
3. Press Done.

Note: If you are using the C5 or the C10 as a master please change the switch on the back of the speaker to Wifi Play.